Rock Gem Clicker

💎 The Rock Gem Clicker – Rock-Solid Tactile Fidget

Bring the grounding texture of nature to your desk with The Rock Gem Clicker! Inspired by the sharp, geometric facets of raw crystals and volcanic rocks, this compact fidget toy blends a rugged, organic aesthetic with the crisp, satisfying snap of a mechanical keyboard switch.

🛠️ Hardware Needed

• 1x Mechanical Keyboard Switch: 

Tip: see photos of the switch I use, brown mx style. 

📐 Print Settings & Recommendations

This model is designed to print easily with zero supports. To truly capture the rock and gem aesthetic, we highly recommend using textured filaments!

• Filament Suggestions:  PLA Marble, PLA Galaxy, Multi-Color Silk PLA, Gold, Bronze, Silver etc Filament used in the printed models shown is Polymaker Panchroma Starlight Comet PLA, Gold PETG, Bambu Lab Bronze PLA
• Layer Height: 0.20mm (Lower layer heights (0.12, 0.08 will make the facets look incredibly sharp, but add to the print time).  Gold colored model was printed at 0.12mm so it looks a bit more detailed, it also added about 30 minutes to the print time. 
• Infill: 15%
• Supports: None required! Just slice and print.

🧩 Assembly Instructions

1. Pop your favorite keyboard switch into the top housing (it should snap firmly into place, add a drop of super glue for a more permanent fit).
2. Align the bottom cover and press fit (or glue, depending on your tolerances) to secure it. 
3. Adding a bit of glue or super glue to both pieces is highly recommended if using as a keychain.