NorthStar Putter
Print Profile(3)
Description
The Northstar Putter is Printed in PETG with a thin layer of TPU behind the faceplate to improve sound.
The putter has a cutout underneath for weights. I used Clay to fill in the gap and added tire balancing weights until i achieved the desired weight. the clay allows the club to have a dead sound (sounds just like a real club).
Attach a new shaft using epoxy. i used a spray adhesive to attach the face plate.
Both Lefty and Righty (Check which plate you are printing one is left one is right)
Step 1. Fill bottom hold using as non water based clay (Wont dry out) then slowly add weights until desired weights.
Step 2. Use spray adhesive to glue on bottom cover.
Step 3. take Tpu insert and use spray adhesive to glue it in.
Step 4. place face plate ontop on Tpu insert useing spray adhesive.
Step 5. paint guild line (if you want)
Step 6.Epoxy in the shaft.
If you have any feedback please let me know! i hope you enjoy!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)