Modular Pokemon Clock

Modular Pokéball Clock

( Please make sure that Purge Tower is active for a cleaner Print)

I had the idea to make a Pokéball clock where you can swap the Pokémon whenever you want.

Just print a Pokéball

and pick your favorite Pokémon, and place it in front of the clock. 

If you feel like changing it, simply switch the Pokémon or try a different Pokéball design.

At the moment there are three different Pokéballs and a few Pokémon to choose from, but I’ll probably add more over time.

Feel free to make your own Pokémon too!
 

All you need is a center hole with an 8 mm diameter, and the Pokemon should be about 1 mm thick.

So you can mix and match however you like and create your own little Pokémon clock setup.

Just print the parts, install your clock mechanism, choose your Pokémon and you’re done.

Have fun printing :)