Eagle Hueforge
Print Profile(1)
Description
Project: Adler.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 175x98.44mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 1.12mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Ivory White for the rest.
The stand used for the Hueforge can be printed here:
https://makerworld.com/models/2002778?appSharePlatform=copy
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)