Print Profile(3)
Bill of Materials
.jpg){kind=small}
Description
Membership
✅ Commercial License Available Want to sell physical prints of this model? Join my Commercial License Membership to legally sell eligible printed products while your subscription is active.
Boost Me (for free)
If this holder saved you from the “where’s the remote?!” daily drama… boost me 😄🚀
Parametric Universal Remote / Phone Holder (Wall Mount) – Custom Size + Screw Presets
Tired of remotes and phones floating around the house? This is a parametric wall-mounted holder you can customize to fit almost anything: TV remotes, AC remotes, phones (with cases), small gadgets, even flashlights.
✅ Fully customizable (no more “almost fits”)
✅ Mount-ready with countersunk screw presets (M3/M4/M5/M6)
✅ Comfortable and customizable thumb-scoop for quick grab
✅ Clean minimalist design – looks great in living room, bedroom, office, or garage
Customize parameters (defaults shown)
Inside size (mm):
- Inside_Width (W) = 50
- Inside_Depth (D) = 20
- Inside_Height (H) = 90
Ergonomics:
- Tilt_Angle = 5°
- Thumb_Scoop_Depth = 50
- Thumb_Scoop_Width = 15
Strength:
- Wall_Thickness = 2.5
Mounting (mm):
- Pitch_Between_Screw = 25
- Screw_distance_from_edge = 10
Countersunk screws (90°):
- Hole_D / CSK_D auto-style values (example shown for M3)
- CSK_Depth is calculated with a +0.2 mm print allowance to help the screw head sit flush.
Print recommendations
- Material: PLA / PLA+ (PETG if you expect heat / heavy use)
- Layer height: 0.2mm
- Walls: 3–4 perimeters
- Infill: 15–20%
- Supports: Not required (depending on your printer bridging, you may enable “support for holes only”)
Tips for best fit
- If it’s too tight: increase Inside_Width by +0.5 to +1.0mm
- For thick phone cases: increase Inside_Depth by +2 to +5mm
- For easier grabbing: increase Thumb_Scoop_Width / Depth
Note:
ISO Flat-head (90°) — clearance holes
- M3: Hole_D 3.4 mm, CSK_D 6.6 mm
- M4: Hole_D 4.5 mm, CSK_D 8.4 mm
- M5: Hole_D 5.5 mm, CSK_D 10.4 mm
- M6: Hole_D 6.6 mm, CSK_D 12.6 mm
Boost Me (for free)
It will really help me :(
🔥 AnySlot Wheel (Pick any number of slots)
🏠 Parametric Wall Remote Holder (Customizable)
Boo-nchy - Ghost Benchy (Halloween special)
Jack-O-Benchy Lantern (Pumpkin Benchy)
✨ Full collection / follow me
Some of My Models:
🏠 Parametric Wall Remote Holder (Customizable)
Candy Wrapper Box | Flower Edition
Membership
✅ Commercial License Available
✨ Full collection / follow me
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (151)