Search models, users, collections, and posts
Float Plane
IP Report
Print Profile(2)
0.16mm layer, 2 walls, 15% infill
21 h
4 plates
50% scale, 0.16mm layer, 2 walls, 15% infill, 2 Plates
4.7 h
2 plates
Open in Bambu Studio
Boost
333
808
53
55
783
406
Released
Description
Float Plane. Printed with PLA 0.4 mm nozzle, .2 mm layer height and 5% gyroid infill. I will recommend using a smooth plate for best results when gluing all the parts together. Don't glue the nose incase the propeller breaks and need to print a new one. Use a #8X1/2in screw to attach the propeller to the nose. Supports are need for the propeller, nose, windshield and the lower floats.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (53)