Metallica Load
Print Profile(1)
Bill of Materials
Description
Project: Metallica Load
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.08mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#bb3d43 PLA BambuLab Matte Dark Red Transmission Distance: 1.5
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Jade White
At layer #22 (1.84mm) swap to Pumpkin Orange
At layer #23 (1.92mm) swap to Dark Red
At layer #24 (2mm) swap to Maroon Red
At layer #25 (2.08mm) swap to Red for the rest.
Note: I use Bambu PLA for all of my prints. If you substitute different brand filaments, the result might not look the same due to different filament transmission distances.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)