Squirrel Feeder
Print Profile(1)
Description
This a squirrel feeder. Printed with PetG. The Glass in Front is 2mm thick, bought a cheap photo frame and cut it to size. The max thickness for the glass is 2mm. You Need 4 3mmx16 bolts and 4 nuts the screw the holders on the back of the feeder. I glue-ed the bottom one to prevent the feeder from sliding off. Do not glue the top one or you cant screw it to a post or tree anymore. The Hinges I glued at the back and the roof.
The Ones I used are from (https://makerworld.com/nl/models/1715065-customizable-hinges-with-conical-interior-knuckles#profileId-1820232)
On plate 4 is a brace to protect the animal against the sharp glass. If you don't use glass, you can leave it.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)