Stranger Things lamp

🧩 Stranger Things Lamp Assembly Guide

🧱 Parts List:

This lamp consists of 3 main parts:

1. Black outer shell (back and sides)
2. White front panel with Stranger Things logo and characters
3. LED light strip

🪛 Assembly Steps:

1. Prepare the Parts
   Make sure all parts are clean and dry.
   Test-fit the white panel into the black shell before applying any glue.
2. Install the LED Strip
   • Feed the LED strip through the small hole located on the back of the black shell.
   • Place the LED strip evenly around the inner edge of the black shell.
   • If your LED strip has adhesive backing, stick it in place.
   • If not, use a small amount of super glue or hot glue (be careful not to cover the LEDs).
3. Gluing the Front Panel
   • Apply a thin layer of glue (for example, Super Glue) along the inner rim of the black shell.
   • Carefully press the white front panel into position until it fits snugly.
   • Hold it for a few seconds to let the glue set.
   • Make sure the LED is centered and provides even light distribution.
4. Testing
   • Connect the LED power source and check if the lamp lights up evenly.
   • If everything looks good — your lamp is ready! 🎉

💡 Tips:

• Apply glue carefully to avoid smudging the white panel.
• You can use any LED color to create different lighting effects.
• The lamp looks best in a dark or low-light environment.