Venom Attack - Hueforge
Print Profile(1)
Description
Free for personal printing use only.
Exclusive monthly projects and commercial license available at Patreon.com/StrataPrints — your support keeps new designs coming!
Project: venom horizontal.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 235x188mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.96mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#8e9089 PLA BambuLab Gray Transmission Distance: 2
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2
#ff5869 PLA BambuLab Basic Pink Transmission Distance: 8
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Blue Gray
At layer #18 (1.52mm) swap to Red
At layer #20 (1.68mm) swap to Gray
At layer #23 (1.92mm) swap to BambuLab Green
At layer #25 (2.08mm) swap to Pink
At layer #28 (2.32mm) swap to Yellow
Border Only Colors from here until the end.
At layer #32 (2.64mm) swap to Ivory White
This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.
At layer #47 (3.84mm) swap to Black for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)