Search models, users, collections, and posts
Ceiling lamp mount
IP Report
Print Profile(1)
0.16mm layer, 6 walls, 40% infill
Designer
48 min
1 plate
Open in Bambu Studio
Boost
40
96
5
0
74
42
Released
Description
Boost Me (for free)
If you like this design, a boost would be greatly appreciated. It really helps support future models and new ideas.
This mount is designed as a practical support for installing ceiling lamps.
It provides a stable fixing point for lamps or other lightweight objects on the ceiling.
Features
- Dimensions: 124 × 25 mm (see drawing)
- Three central mounting holes for screws (M3 recommended)
- Two side holes (6 mm from the edges) for additional fixation or optional M3 brass heat-set inserts (quite tight)
- Suggested material: PETG, or ABS for extra durability
Print Recommendations
- Layer height: 0.16 mm for a clean finish
- Wall thickness: at least 6 perimeters for maximum strength
- Infill: ≥ 40 % (Gyroid or Grid recommended)
- Print slower (around 40 mm/s) to improve layer adhesion and overall strength
- Nozzle: 0.4 mm
- Print time: approx. 40 minutes
Application
Simply screw the mount to the ceiling and attach your lamp securely.
Disclaimer
This model is provided as-is, without any warranty of strength, safety, or suitability for electrical installations.
Use at your own risk. Always ensure that your mounting setup is appropriate for the weight of the lamp and complies with local safety regulations.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (5)