StackRack - Free 3D Print Model

Search models, users, collections, and posts

ID3D

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

X1 Carbon

H2D

P1P

H2S

H2D Pro

P1S

X1E

P2S

H2C

X2D

A2L

3 spool StackRack. 0.2mm layer, 3 walls, 15% infill

Designer

24.5 h

4 plates

5.0(5)

4 spool StackRack. 0.2mm layer, 3 walls, 15% infill

Designer

27.9 h

4 plates

5.0(2)

Open in Bambu Studio

Boost

114

325

320

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Circular Embedded Electronic Digital Thermometer Hygrometer

Description

The StackRack is a interlocking modular rack for storing and transporting filament. It can used with the rack only for open storage or with the cover for dry storage. It has a handle on top for easy handling or to be used as a carry case for transportation. Regular 200mm spools will snap into place. There is now a 3 spools per rack version (which will fit the X1C, P1P, P1S and A1), or a 4 spools per rack version that can be printed with the H2D and H2S (or other large printer). You can chose to print with or without a hole for a hygrometer.

To snap the lock in place i recommend using something flat and sturdy to help push with. I used a saucepan. Some lubrication could help as well. Remove supports on the base plate before snapping the lock in place.

The base plate should be fastened to the rack with superglue for easier handling and better sealing.

tidy filament storage

stackable storage boxes

stackable spool holder

Comment & Rating (17)

@tarrier

Hmmmm, I must be missing something. I just printed the version with the “dry box” cover, only it’s not sealed or even close to being, it’s just a rattly, loose fitting surround with huge gaps at the top - nothing will stay dry in this. Such a shame as this was the best idea I found so far for printing your own filament storage that’s not for a single spool - shame the “dry” part doesn’t work. Or am I missing something?

The designer has replied

@ID.3D

The cover is supposed to go further down. Then a smaller ledge will seal against the cover. There is a recess in the lower plate that the covers lower edge needs to go into. Make sure it fits and there is nothing preventing it to go all the way into the recess.

@tarrier

Replying to @ID.3D :

thanks for taking the time to reply. The base doesn’t have a recess on either side, that would explain why it doesn’t go down far enough to be snug at the top. I’m confused - did I print it wrong? bro it’s still the best multi-spool home print design I’ve found, I just wish I could make it air tight (ish)

@ID.3D

Replying to @tarrier :

I think it's there on the first picture but filled with a very thin support. Try to get it out. If it is fused then print the plate again and remove that support (it is not really needed).

@MelodicJurgen

Hello I think the idea is great and I really want to use it I printed it and I also have an assembly problem The 3 assembled pieces create a lot of play and do not make the assembly mountable and watertight Either I can put the bottom part with the central part, the lock works but there is significant play with the top part Or, I can assemble the top part with the central part but I can no longer put the bottom on Should the bottom part partially insert into the central part If so, I printed it in PLA, so it's not very flexible Can it be done in PLA

Show original

@MelodicJurgen

Problem solved !! Thank you !!

Show original

@user_4107297735

Print Profile

3 spool StackRack. 0.2mm layer, 3 walls, 15% infill

I really like the design turned out great. well designed

@GoldenVenom

Print Profile

3 spool StackRack. 0.2mm layer, 3 walls, 15% infill

already printed 2 versions one with 4 bays abs the handle and one where I cut off the top side so it fits nicely in a dehydrator.

@pockettim

Superb design and was well worth the lengthy print time! Very clever idea. Thanks.

@user_787182495

Print Profile

4 spool StackRack. 0.2mm layer, 3 walls, 15% infill

This is truly a great solution, only the case should be a little smaller, then everything fits perfectly

Show original

@mellielulu

trying to download stl file but only getting 3mf which is not preferable

@Totchkets

Boosted

I have not printed this yet but came across this during a search and I'll tell ya, what a great idea. This will solve my problem of spools lying around. Love it!

@user_1051787201

Print Profile

4 spool StackRack. 0.2mm layer, 3 walls, 15% infill

@user_1248892890

Print Profile

3 spool StackRack. 0.2mm layer, 3 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

StackRack - Parametric, Stackable, Linkable System

Will R.

StackRack System LiTime G24 Smart 100AH LiFePo4

C59