E27 Softbox Lamp DIY
Print Profile(1)
Bill of Materials
- Black Technical Paper x 1: It shouldn't let any light thru. I used a 170g/m2 grammage.
- Aluminium foil x 1:
- Diffusing material x 1: Any white material such as an old t-shirt, tablecloth etc.
- E27 Bulb Holder x 1:
- E27 Bulb x 1: As bright as possible
Description
Boost Me (for free)
If you enjoy these bigger projects, consider giving me a free Boost!
It really helps me stay motivated and create even more exciting designs for you to explore and print. Your support means a lot—thank you!
E27 Softbox + Lamp
This project is a lamp and softbox designed for a standard E27 bulb. It’s a DIY build that might take a bit of time, but the process is relaxing, enjoyable, and most importantly—it works! The main parts are 3D-printed, and the rest can be made from basic materials you probably already have at home. I’ll be honest—it’s not the most professional piece in the world, and there’s always room for improvement—but it fully delivers on the design goals I set for it.
Important Note:
I, myself used ASA for most of the parts, due to its heat resistance and enchanced durability, so I can safely recomend it. If you decide to print everything out of PLA or PETG, it will propably still be fine, but please remember that you are doing it at your own risk. Nevertheless if you do, please comment how it went.
Assembly instructions:
Step 1: Take the Lamp_middle part and insert a standard E27 light bulb holder into it.
If you plan to mount the lamp somewhere, secure it from the bottom using 5×20 screws.
Step 2: Here we simply screw in the Lamp_front part in using 4 5x20 hexagonal screws.
Step 3: Attach the Lamp_back part, just as the name suggests, to the back of the assembly.
The center hole is designed to hold and route your power cable.
Step 4: Here we attach the Lamp_front2 part by simply pushing it in place.
Step 5: Connect to parts of the template using tape and cut 14 pieces of black paper in a shape of the template. After cutting cover paper in kitchen aluminium foil for better light deflection.
Step 6: Now we take the Softbox_sun and glue in 14 Softbox_beam. Make sure you put them in the right direction with the flat ending heading out of the softbox_sun. (Same as on the drawing)
Step 7: Now we glue in the Softbox_top part in 7 times to crate a countour and connect all softbox_beam parts. After that you can glue in previously cut black paper.
Step 8: The last step is glueing the light_diffuser part in the same way to create a contour and attaching your diffusing material (I used a tablecloth) and than attaching it to the softbox with paper/office clips.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)