Venum Hueforge
Print Profile(1)
Description
Print with 100% infill, a 0.08 mm layer height, and a 0.1 mm base layer.
The model measures 123.32 x 220 mm.
Higher layer heights are permissible, provided they remain above the minimum depth of 0.26 mm.
The maximum depth is 2 mm, while the actual depth measures 2.1 mm.
Filaments used:
PLA Smart Recycled Black (Transmission Distance: 0.5)
PLA Smart Recycled Dark Gray (Transmission Distance: 8)
PLA BambuLab Basic Red (Transmission Distance: 4)
PLA Sunlu Matte White (Transmission Distance: 5)
This print utilizes four distinct filaments.
Switching instructions:
Initiate printing with black.
At layer 8 (0.66 mm), transition to Dark Gray.
At layer 10 (0.82 mm), revert to black.
At layer 13 (1.06 mm), switch to red.
At layer 16 (1.3 mm), transition to white for the remainder of the print.
Boost Me (for free)
Any assistance is greatly appreciated, THANK YOU VERY MUCH!!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)