Flaschenöffner
Print Profile(1)
Bill of Materials
Description
Hello Melter
This is a wall-mounted bottle opener with a magnetically held cap catcher.
A pause is inserted in layer 14 of the 3mf file to insert the magnets D=20x3mm.
I have roughened the magnets on one side with sandpaper for better filament adhesion.
The magnets can simply be pressed into the bottle cap catcher after printing (pay attention to correct polarity).
Material:
2x M6x10mm round head screws
2x M6 nuts
1x bottle opener from Amazon (6.4cm/2.51inch x 8.4cm/3.3inch) Hole spacing approx. 6.75cm/2.657inch Photo is attached
4x 20x3mm magnets from MakerWorld
If you follow me, you can also see my over 65 other self-designed models.
I would be happy about a like, follow, and Boost.
Shopping cart release with chip
https://makerworld.com/en/models/1520308-shopping-cart-opener-and-chip
This is an accessory box for the P1S from Bambu Lab.
https://makerworld.com/en/models/2491029-p1s-toolbox
https://makerworld.com/en/models/1796764-spool-filament-clip-internal-ams-compatible
Have fun printing
your Uncle Peter
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)