Search models, users, collections, and posts
Print Profile(1)
0.2mm layer, 2 walls, 10% infill
Designer
1.7 h
1 plate
Open in Bambu Studio
Boost
8
35
0
0
23
17
Released
Description
Description
Print Settings:
- Printer: Bambu Lab A1
- Layer Height: 0.2mm
- Initial Layer Height: 0.2mm
- Wall Count: 2–3
- Infill: ~10%
- Seam: Back
- Supports: Required (enabled for overhangs like the “hands” and sign edges)
- Build Plate: Textured PEI
- Print Time: ~1h33m
- Prepare & Timelapse Time: ~6m
- Total Time: ~1h40m
- Total Filament: 28.92g
- Filament Cost: $0.71
AMS Color Slots:
- Slot 1 (Black): 7.47g
- Slot 2 (Green): 2.60g
- Slot 3 (White): 7.50g
- Slot 4 (Red): 11.52g
- Filament Change Times: 33
Material:
- PETG recommended for long-term outdoor use.
- PLA is suitable for short-term or shaded/dry environments but may degrade in sun/rain.
Notes:
Model lays flat and is optimized for multicolor AMS printing, but works fine in single color if you prefer to paint. A fun and sturdy garden label, part of a growing set.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)