Bambu Lab Spool insert / Spulenadapter
Print Profile(3)
Description
Hello
I printed the model from Jason and a bunch of wires and found that despite its description, it was more of a polygon than a circle. I printed it in PETG and after using it in the AMS 2 Pro to dry, I found that I could no longer get it off the spool. Out of sheer frustration, I then started working with Fusion360 and created my own model that has a larger diameter in the spool as well as in the holes for the filament, this allows the filament to be threaded more easily and also to be pulled out of the AMS more easily. I use filaments made of PLA, PETG and ABS, of course also in the same colors. In order to be able to tell them apart after printing, I have added the name of the material it was printed with to the spools. This is to avoid drying a PLA core in the AMS-HT with ABS at 80 degrees or PETG with PLA core at 65 degrees, that wouldn't end well. I would be very grateful for your support. Thank you
My special thanks go to the two creators who inspired me to create my model
https://makerworld.com/de/models/24264-bambu-lab-spool-insert-for-manual-winding#profileId-21476
https://makerworld.com/de/models/1059324-bambu-lab-spool-insert-core#profileId-1047371
Boost Me (for free)
Thank you very much for your kindness, likes, downloads, makes and boosts. I am saving to expand my equipment with hardware and filaments. Thank you for your contribution on this way!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)