Search models, users, collections, and posts
Engine guard slider
IP Report
Print Profile(1)
0.2mm layer, 6 walls, 100% infill
Designer
1.9 h
1 plate
Open in Bambu Studio
Boost
15
33
0
0
12
3
Released
Bill of Materials
List other parts
- M6x40 cap screws x 2:
- M6 spring washers x 2:
- M6 spacer (outer diameter about 7.8mm) L15 x 2:
- SUS G-FAN series SGF-0035 x 2: https://g-fun.jp/products/detail.php?item=SGF-0035
Description
This is a slider and its mounting parts that are attached to the 24mm inner diameter hole at the end of the engine guard, etc.
The following parts are required for installation.
-Slider body 2 pieces 3DP
-Fixing parts 4 pieces 3DP
-M6x40 cap screws 2 pieces
-M6 spring washers 2 pieces
-M6 spacer (outer diameter about 7.8mm) L15 2 pieces
-SUS G-FAN series SGF-0035 2 pieces
https://g-fun.jp/products/detail.php?item=SGF-0035
Also, since the nut included with SGF-0035 has a large outer diameter, you will need to slightly grind down the four places pointed by the screwdriver in the photo with a grinder or similar.
Please refer to the photo for the locking mechanism.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)