Small containers

Small containers with screw-top lids for keychains in various sizes

One example 3MF-file

TubeContainer_Inner12d30hAN05xh

i.e. Inner 12d == 12 mm diamter

30 h == 30 mm height

AN05xh = Tops A N=NoGap (or Normal) 05xh == 5 mm extra height in the top (my logic doesn't have to be yours)

STLContainer

The file names …_InnerNdNNh

The Nd == the inner diameter

The NNh == the inner height of the container

The tops may have to be printed with brim

Also the lids comes in two versions, one with 2 mm gap for a rubber gasket (see photos) and one without the gap (where you don't need a gasket).

Print with 100% infill

STLTopsA

Tops with keyring arch

The space is 0, 5, 10, 20, 30 and 40mm versions for both with gap for rubber gasket and without

File names

TubeContainerTop_Gap2_InnerNdNNNxh (For rubber gasket  version)

and

TubeContainerTop_NoGap_InnerNdNNNxh (For non gasket version)

The Nd == the inner diameter (as given in the folder name) 

The NNNxh == the extra height of the top, 0, 5, 10, 20, 30, and 40 mm

STLTopsB

Tops with keyring hole

Same logic as above

With a 5 mm hole instead of the arch