Water Dragon - Free 3D Print Model

Search models, users, collections, and posts

mlupien

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

4.4 h

1 plate

Open in Bambu Studio

Boost

Released

Description

All of the pictures displayed are of the actual models. Please take a moment to rate and endorse the models, as it is very helpful.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 140.34x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic BambuLab Green Transmission Distance: 2
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA bambu cyan Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to BambuLab Green
    At layer #10 (0.88mm) swap to Blue
    At layer #13 (1.12mm) swap to Orange
    At layer #15 (1.28mm) swap to cyan
    At layer #19 (1.6mm) swap to Jade White
    At layer #29 (2.4mm) swap to Black for the rest.