Poop Pop Stop V1 by marcelcountry

marcelcountry

3D Printer>3D Printer Parts

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 20% infill

Designer

1.5 h

1 plate

4.7(15)

ASA Filament, Rabbit Ears, 7% Gyroid infill

35 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

117

213

140

Released

Description

Dear friends , I present to you version V1
The substantial difference is that you can use another accessory together

( https://makerworld.com/it/models/93701#profileId-100099 )

Let me know what you think.

Please use my default print setting

Thank you all.

Test Purge Filament

Comment & Rating (32)

@BenjDavidson90

Each time a print is made, a poop gets stuck between the cleaner and the hole. I reprinted a new cleaner holder to be sure (it's the one supplied in the description), same thing.

The designer has replied

@marcelcountry

It's strange it doesn't happen to me try printing it with a thinner layer

(Edited)

@user_1548198430

Boosted

same thing for me every time - thinking about trimming off the curved piece just to the left of the wiper will attach a photo - i have only tried this with pla-petg so maybe with different filaments it does not happen - all prints perfect, so dont want to have to adjust layer height etc. - great design and love the wiper mod - just reporting my results - Really wish it worked ....

(Edited)

@OldSalty3D

Replying to @user_1548198430 :

I've noticed this as well. I have this installed on my X1C, after the first layer is inspected the extruder parks itself over the poop shoot, but it's right next to the wiper. It then heats up the extruder and extrudes a little bit of filament before wiping. This extruded filament sits right on top of the V section of the cover and does not drop into the shoot. I've had my wiper broken when the extruder hit that little nub during a wipe motion when I didn't manually push it off into the poop shoot. I believe that this is a firmware issue, I don't know why they just didn't have the extruder park in the normal spot while heating up after first layer inspection. I've looked through the printer profile Gcodes to see if I could find the Gcode that it uses for parking the extruder so that I could change the X and Y coordinates, but I didn't see this in any of the Gcode settings of the printer profile. So, this must be imbedded into the firmware. I too am experimenting with cutting out the V section of the cover.

@giovannivigliot

Print Profile

0.2mm layer, 3 walls, 20% infill

perfect!

The designer has replied

@marcelcountry

Thanks for your feedback

@FrancescoM

Print Profile

0.2mm layer, 3 walls, 20% infill

perfect

The designer has replied

@marcelcountry

Thanks for your feedback

@Woogie

Nice snug fit. Zero mess inside printer since installing this. Thanks 😊

@BeerdasDrygoods

Print Profile

0.2mm layer, 3 walls, 20% infill

printed in Bambu PETG basic, no issues, thx

@ziburiulukas

Boosted

Print Profile

ASA Filament, Rabbit Ears, 7% Gyroid infill

Printed fast. Haven't tested it yet, hope it works also looks cool.

The designer has replied

@Woogie

Thanks :)

@TinyTheClown

Boosted

this really helped alot, thank you

The designer has replied

@marcelcountry

A thousand thanks

@marcelcountry

Thank you

@SilenceR

I am printing now using Bambu ASA for my X1C. I also have PFTE Tube coming in the mail to add the addon! I shall report back with the feedback once it's installed :)

The designer has replied

@marcelcountry

I hope you can solve the problem. Thank you