Search models, users, collections, and posts
Leuchtturm
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 5% infill
Designer
25.3 h
8 plates
Open in Bambu Studio
Boost
36
114
4
6
72
25
Released
Description
Content has been automatically translated.
Description:
This decorative lighthouse is assembled from multiple parts and is a real eye-catcher for any maritime interior style. The individual segments can be additionally glued together if required to achieve a particularly strong bond.
Printing instructions:
- Pay particular attention to a clean print quality for the upper part (lantern top) as it contains delicate details.
- It is recommended to reduce the print speed to about half of the total height so that the thin struts and fine areas are cleanly executed.
- Different filament colors can be used for a beautiful contrast (e.g., red/white for the tower and black for the roof).
Assembly:
- Remove the printed parts from the print bed and remove any support structures.
- Insert the different colored parts into each other and glue them together if necessary.
- Carefully place the lantern top on the tower.
- Optionally, a small LED or flickering light can be placed inside to create an atmospheric lighting effect.
Have fun printing and assembling!
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)