Interactive Record Wall - Free 3D Print Model

Search models, users, collections, and posts

痞子蔡

Hobby & DIY>Electronics

IP Report

Print Profile(0)

Add the first print profile to earn points

Boost

Released

Description

Content has been automatically translated.

Show original

1. The outer shell uses PETG material; if possible, resin printing is the optimal choice.

2. For the record portion, an opaque material is necessary due to the underlying breathing lights; use a solid black material.

3. If you desire a metallic finish:

Suggestion: Print the top cover and magnetic head in pure white, then apply black primer spray paint, followed by metallic paint to achieve the metallic effect. (Model Spray Painting Tutorial)

4. As the rear cover is hidden, any color can be chosen for printing.

1. Apply black water-based primer, two coats, with a 20-minute interval between each coat. Ensure the paint is touch-dry.

I used Gunze Sangyo water-based primer B-526 Black 1500 mesh.

2. For metallic paint, I recommend 匠域JWEM15 Titanium Gold or 匠域JWEM12 Champagne Gold.

One might ask, can I just use black material and directly apply metallic paint? Yes, but the effect will not be as good as using a primer; the color will be more three-dimensional and realistic. Priming is recommended if possible.

3. Please take appropriate safety precautions when spraying. Apply the metallic paint evenly in 2-3 thin coats, ensuring each coat is touch-dry before applying the next.

4. Below, the left shows a white base coat with primer, and the right shows a black base with direct metallic paint application. Choose whichever you prefer.