Ceiling hook Strong - Free 3D Print Model

Search models, users, collections, and posts

mkersjes

Household>Other House Models

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 30% infill

Designer

1 h

1 plate

5.0(48)

0.2mm layer, 6 walls, 35% infill

2.8 h

1 plate

Open in Bambu Studio

Boost

165

536

104

937

639

Released

Bill of Materials

Bambu Filaments

Select all

PETG HF

Description

I was in need for a strong hook to mount underneath my desk and on the ceiling for hanging bags and cables so i designed this one .

I have printed it in PETG-HF for strength and flexibility.

I will test the holding capacity and mention it here when i have time ;)

printed in just 1 hour and 31 grams of filament.

Boost Me (for free)

Like the design and time spent ???
Please consider to boost the model for support and making more models.

Comment & Rating (104)

@krinkle

Boosted

Great print. I'm using these to hold up a home built air filter made out of plywood and an old microwave blower motor. I also modified the model to make a full loop for the hook to go into for this project. I'll figure out how to upload it here

The designer has replied

@mkersjes

many thanks for the support and photos...

@krzysidlo

Print Profile

0.2mm layer, 6 walls, 30% infill

I modified the model to my needs, and it works great for my projector screen

The profile uploader has replied

@mkersjes

👍

@user_1514708668

Print Profile

0.2mm layer, 6 walls, 30% infill

Sturdy construction. When installing, I nailed the hook to the wall. I used a hammer.

The profile uploader has replied

@mkersjes

awesome 👌

@user_1566732633

Boosted

Print Profile

0.2mm layer, 6 walls, 30% infill

printed in Bambu PLA Matte

The profile uploader has replied

Show original

@mkersjes

lookinga awesome , many thanks for the great feedback 😀 , I hope you will enjoy the model and 3dprinting. Consider to take a look at my other models 👌 🚀🚀🚀

@Gabbaghoulie

Print Profile

0.2mm layer, 6 walls, 30% infill

nice hook.

The profile uploader has replied

@mkersjes

many thanks for the great feedback 😀 , I hope you will enjoy the model and 3dprinting. Consider to boost the model for support if satisfied and take a look at my other models 👌

@SuperRo0t

Boosted

Print Profile

0.2mm layer, 6 walls, 30% infill

Printed perfect and they look like they’ll carry a decent weight.

The profile uploader has replied

@mkersjes

many thanks for the awesome feedback 🥰, I really hope you enjoy the models please take a look at my other models and consider to boost the model for support ;) 😍 i haven't come around to testing the weight they can carry

@knallaff

Print Profile

0.2mm layer, 6 walls, 30% infill

Stable all-round hook. Good to print, nice appearance & above all stable👍 Many thanks to the creator for sharing 🫶

Show original

@user_1416923470

Print Profile

0.2mm layer, 6 walls, 30% infill

Hook is very strong. It's been holding my potted plant to my ceiling for a while

The profile uploader has replied

@mkersjes

many thanks for reviewing the model 😀

@Marko41

Print Profile

0.2mm layer, 6 walls, 30% infill

The hole behind the part is slightly too close. I was unable to properly fit the drill driver bit into the space, which caused it to be slightly misaligned when tightening the screw. Other than that design is good.

The profile uploader has replied

@mkersjes

many thanks for reviewing the model 😀

@user_3134239148

Print Profile

0.2mm layer, 6 walls, 30% infill

We always needed a sky hook in statics and dynamics classes. Now we have one. This print is very strong in PETG-HF and works great!. Thanks for sharing!

The profile uploader has replied