Prints perfectly. I made mine out of Bambu PETG HF Dark Grey and Blue. On the container I added a racing stripe at the top of the bin to give it some color. Very industrial design - solid construction. My only ask would be on the P2S the slide is a bit short... so there is a gap between the slide and the bin. Would be great if you could offer a slightly longer slide as others also pointed out. With that said, the poop comes down with enough speed that it makes it into the container as designed and because its not longer, easy to remove the container to empty as you don't have to tuck under the slide.

Works very well! Now I need to size this down for a Jack Daniel's bottle!

Easy and fun project for a birthday gift! Prints well. I printed in Bambu Silk+ Blue and Gold. I added text to the bottom to customize.

Great design and useful print! I didn't see the designers caution and printed in PLA Silk Rainbow 6 from Sunlu. No sagging issues and print went well. Only issue I had was the clips were too tight for me. I initially printed the clips in a cheap PLA (too tight), then reprinted in Bambu PETG HF (better as had more flex) but they were still too tight. There is very little material where the clips attach and in my case the model cracked there when installing the clips. Superglue to the rescue. I ended up scaling up the clips on the X & Y axis to 101% and reprinted in PETG (for more flex) and it solved my pressure issue. I should have scaled the Z 1% as well as the Silk may have been thicker. I also superglued the flat "shelves" between the layers together to give the model more strength and reduce the stress on the clips.