pretty good

printed ok. but the parts that habe to bend, it broke two times. so I recommend print more of those

the very best!

still kinda tight. it absolutely needs lubrication. you can circumvent using the metal spring using a rubber band on the free studs under the "push" arm

adding a adhesive tape helps tightening the tube

beautiful model! All wheels must be aligned to ensamble it, and is very hard to pull it out without breaking the axles if there is a mistake. To soften it up. I recommend play with it submerged in soapy water

I cant use a double sided tape, because it bends. but I managed to use it, making holes on it.

eggcelent

I'm amazed of how well it works. it bites fingers!

way too tight to open with nails. you better have a screwdriver or something

main body printed with PLA. let's see how much it last. good model!

pretty nice. printed on petg. I was surprised of how flexible it is on petg. The ensamble wasn't easy, I had to sand a bit to fit the edges.

quite interesting being able to fold PLA

no complains

pretty good 👍. the hex rod is lose on one side, and don't fit on the other.🤪 put tape around the rod to fit it tightly.

pretty good 👍

pretty good

better do not print with PLA. it will deform trying to dry the beads inside