Came out perfect! Printing more!

Need to glue magnets, not press fit. I split the model to removed the unneeded for me lip around it so the top is flat. Thanks for the great model!

Used all matte colors Used these switches: https://a.co/d/5qr5ikO had to trip the small black lip around the edge and the metal contacts, then very firmly pressing the ball down on to the switch against the table got them to go in snug and flush. End result is great. Make it as a present, gonna have to make myself one now.

I've printed 32 of these, they're great.

Light parts I used Socket: https://a.co/d/2vHrwMl Dimmer cable: https://a.co/d/dUYSKLy Bulb: https://a.co/d/4gzaVgi

I finished printing these and realized I wasn't going to be able to fill them without a funnel and you had uploaded this minutes ago. Clutch. Thanks for the funnel!

Printed the large one in Sunlu Dual Matte Filament. Removed the center most object as I was having a little trouble with it. Print Details: 0.6 HF Hotend 0.18mm Balanced 15 mm/s initial layer Sport Mode 3.7 H

Had some small issues with later adhesion on some areas. Not a big issue though. I think it may have been because of uneven heating of the bed or maybe I didn't clean my plate well enough. Fitment was great. Didn't need the optional shipping screws. The AMS attached very securely without them. One note, the 3MF file has one of the axis pieces objects unchecked. I checked it before print as you need both.

Came out great in mat black. Used #10 2.5" wood flat head screws. the threads just barely caught which held them while getting it leveled for mounting. Well designed and easy to use.