I didn't want to stick an inspection sticker on my 2025 990 Duke and didn't have time to order one because I needed it immediately. That's what 3D printers are for… Ride safe and always stay on top Note: I'm not a professional 3D designer. I develop or modify models for my own use when there’s no suitable solution available on Makerworld.

Due to legal regulations in my region, this weapon must be transported disassembled. However, I didn't want to risk any damage during transport, hence this case. This case fits the standard Mil-Spec AR-15 and also some 9mm PCC variants. I was only able to test it with Schmeisser and Messerschmitt those are the only PCCs I have, but it should fit others as well. ATTENTION: a standard lower cover for a Mil-Spec 223/556 AR-15 will not fit a Schmeisser/Messerschmitt PCC, but the reverse is possible.

Due to legal regulations in my region, this weapon must be transported disassembled. However, I didn't want to risk any damage during transport, hence this case. This case fits the standard Mil-Spec AR-15 and also some 9mm PCC variants. I was only able to test it with Schmeisser and Messerschmitt those are the only PCCs I have, but it should fit others as well. ATTENTION: a standard lower cover for a Mil-Spec 223/556 AR-15 will not fit a Schmeisser/Messerschmitt PCC, but the reverse is possible.

Simple Glock follower, printed in ASA with support structures for a clean finish. It was important to me that the sliding surfaces were printed as cleanly as possible. One of my followers broke, so this model was the solution for my Messerschmitt AR15-9S. It fits (almost all) Glock pistol and also the 10-round PCC magazines for Schmeisser ARs. Note: I'm not a professional 3D designer. I develop or modify models for my own use when there’s no suitable solution available on Makerworld.

Simple OSIGHT logo with magnet for your gun cabinet or similar. Holds up to two 12x3 mm magnets. I resized it a little bit to fit magnets. Thnx to @Sigrunner for this Design. Note: I'm not a professional 3D designer; I develop or modify models for my own use when there’s no suitable solution available on Makerworld.

Protect your high-quality OSIGHT XR Red Dot Sight with this rugged and precision-engineered transport case. Designed for shooters and enthusiasts who value safety and organization. This box features a custom-molded interior to ensure your optic sits securely without rattling – perfect for your range bag or tool kit.

These are brackets for a wooden plank that holds @Boerni's Throom Targets For me, it was important that it was compact for transport and easy to assemble. I used a 25mm aluminum tube as the feet. I adjusted the print profile for stability and clean printing, even though it makes the print take longer. I wanted to be on the safe side ;) Note: I'm not a professional 3D designer, I develop or modify models for my own use when there’s no suitable solution available on Makerworld.

This is a simple and sturdy Ikea Skadis holder for the TEMU GYD Preset Torque Screwdriver (0.6/1.2/3/6 N.M). I bought this thing to mount my Osight XR sight on my Walther PDP Match. Have fun! Note: I'm not a professional 3D designer; I develop or modify models for my own use when there’s no suitable solution available on Makerworld.