Prints beautifully on the outside with no visible seam and conveniently located holes to hang the skull, but the supports were a pain the remove from the underside and left very visible scarring on the model. Still giving 5 stars because it looks very pretty though.

Works great at normal scale but at 50% the scale just messes the threading and prevents the egg from closing seamlessly (in my experience)

Prints really nicely but DAMN the jaw is a pain to snap into place without bending or heating the model a little bit 😅 On the other hand the jaw stays open by friction and isn't slack.

Nice articulated model, but do make sure your bed is clean before printing or you might have a random tentacle failing to print correctly. I printed 3 octopuses on a single plate and one is missing 2 tentacles due to adherence issues.

Prints really well and the model is adorable, but I would edit the support settings for an easier removal as they tend to damage the underside of the model, and on the tiny scale Tiki the neck snapped while removing the supports.

printed great at is ideally sized to take in a small plant pot for a succulent or something similar

A tad rough at 50% scale (to be expected) but still prints great, enough room on a P1S bed to print a few at a time :)