10/10, Great work Creator! I used the default settings, PLA, Black/White/Red. No issues , Quite Strong! Great print! (i do suspect that PETG/ABS might be a better choice for even more strength (and heat resistance) though) *edited for grammar/spelling

Looks Great! i used simply PLA , Black/Grey/White/Red with default settings. I did up the size to 1mm thick (was 0.6) . No biggie. EDIT* .. 7 color changes, Took about 1hr 20mins (perhaps less). . also, its hard to see in this pic - but there is Shadowing in Many places - its Great work! gg, creator! 10/10

i did take pics , but it worked out really well at 150% , PETG. (note: Dont blindly make it +size, as the 'light' holder will get too big, you have to edit)

10/10 just great! Thank you Creator . i will be printing a different stem and bottom/ground area. Edit: I did end up printing the 'ground and Stem' also - Still 10/10 , just wonderful. *boosted.

10/10 printed with iboss 'Shiney Silk Pla-Plus', at 230c with a .2mm nozzle. just wonderful, thanks creator

IMO the Best Glasses Holder, Thanks Creator! Printed with: Overature PLA 'Green Shimmer' NOTE: .Fitment is VERY tight! May cause issues with some filaments/expansion. .I Created a Top CAP and upload/shared it as a Profile (YAY!). Note to Creator: Consider an update to make the Bottom Base a little thicker :) Overall, just wonderful , thanks again Creator! EDIT / UPDATE: .Boosted