Exactly as advertised.

These simply turned out beautiful. I did one in 3D Printing Canada Budget PLA white and the other in Bambu PLA Wood.

I printed the numbered blocks using this profile as they were clean and all the numbers displayed correctly. It took a long time to print, but it was worth it. They were beautiful! I used a white 3D Printing Canada Budget PLA for the main blocks and a Bambu Wood PLA for the numbers. It smelled amazing! I also coloured a couple of the books on the one block with a teal PLA from 3D Printing Canada Budget PLA. It turned out great! I opted not to print the stand from this profile only because it seemed faster and less wasteful to use one of the remixes that separated the "books" which let me print a bunch of different colours to get my own combination.

The supports left an edge I couldn't clean in the short time I had to print it. Fortunately, it was for a kindergarten class and they loved it and walked it around the school.

Perfect! I have a Roborock Qrevo Curv. My filters fit and I now have a way to dry them without trying to prop them up. Easy print. Worth it!

I've tried a lot of clips and they were all great. And all of them ended up falling short for my setup and needs. These won't puncture filament bags, they aren't so tall that they can interfere with a rotating spool, they are easy to use and easy to print. And now that I've figured out how to print in PETG, I can even leave them on a spool when if it has to go back into the filament dryer. PERFECT! I only held back on one star as there was no PETG profile to choose from.

Perfect fit! I used some PLA support material as I was a little concerned that I wouldn't get all the supports out. As it turned out, everything came out well enough. I really don't think I need to add the extra time by using the support material. It looks good and fits perfectly.

Nice, simple, printed as described and expected. This is going to a kindergarten class for their art table.

Great little, fidget toys. Printed mine using UnveilForm's duo tone silk using Bambu's Silk profile on my A1 Mini. Came out great. Had to turn on ironing to get the very center heart to come out smooth. Was able to churn out a class set for my son nice and fast.

Straight forward. Took short of 4hrs on my P1S. Used black JAYO PLA on the Bambu Basic PLA setting on a Biqu Panda Cryogrip Glacier build plate. I had the time, so I just sent it to printer. Unfortunately, the puck opening is too small for my UGreen Qi2.2 wireless puck. And, as advertised, my Pixel 10 Pro with the Spigen Armor case fits just fine. Nice work!

no problems, clean, simple print. fits perfect. been running with it for a few days and no problems at all.