#HLMT23 I made this so Mr HLModtech can have his own group for people to post their models on! Please like this comment and check out @user_2141201503 and @LayerLab1 !

SO I made a custom code that connects your P2S to OBS Studio so that when you start a print, OBS Studio (video recording app) will start recording a video and when the print ends the recording will end too! Here is the link: "https://github.com/LayerLab1/Bambulab-P2S-Auto-record-OBS"; Hope you enjoy and give any feedback but be nice!

I got the P2S!

So people of Makerworld. A while back, I made a Gcode that would make your purge line bigger for the A1 and now I'm back with a END G-code that make your bed cool before it makes the end sound! Here it is: ";===== date: 20231229 ===================== G392 S0 ;turn off nozzle clog detect M400 ; wait for buffer to clear G92 E0 ; zero the extruder G1 E-0.8 F1800 ; retract G1 Z{max_layer_z + 0.5} F900 ; lower z a little G1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos G1 X-13.0 F3000 ; move to safe pos {if !spiral_mode && print_sequence != "by object"} M1002 judge_flag timelapse_record_flag M622 J1 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M400 P100 M971 S11 C11 O0 M991 S0 P-1 ;end timelapse at safe pos M623 {endif} ;===== COOL BED BEFORE FINISH SOUND ===== M140 S35 ; set bed temp to 35C M190 S35 ; wait until bed reaches 35C M106 S0 ; turn off fan M106 P2 S0 ; turn off remote part cooling fan M106 P3 S0 ; turn off chamber cooling fan ;G1 X27 F15000 ; wipe ; pull back filament to AMS M620 S255 G1 X267 F15000 T255 G1 X-28.5 F18000 G1 X-48.2 F3000 G1 X-28.5 F18000 G1 X-48.2 F3000 M621 S255 M104 S0 ; turn off hotend M400 ; wait all motion done M17 S M17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom {if (max_layer_z + 100.0) < 256} G1 Z{max_layer_z + 100.0} F600 G1 Z{max_layer_z +98.0} {else} G1 Z256 F600 G1 Z256 {endif} M400 P100 M17 R ; restore z current G90 G1 X-48 Y180 F3600 M220 S100 ; Reset feedrate magnitude M201.2 K1.0 ; Reset acc magnitude M73.2 R1.0 ;Reset left time magnitude M1002 set_gcode_claim_speed_level : 0 ;===== printer finish sound ========= M17 M400 S1 M1006 S1 M1006 A0 B20 L100 C37 D20 M40 E42 F20 N60 M1006 A0 B10 L100 C44 D10 M60 E44 F10 N60 M1006 A0 B10 L100 C46 D10 M80 E46 F10 N80 M1006 A44 B20 L100 C39 D20 M60 E48 F20 N60 M1006 A0 B10 L100 C44 D10 M60 E44 F10 N60 M1006 A0 B10 L100 C0 D10 M60 E0 F10 N60 M1006 A0 B10 L100 C39 D10 M60 E39 F10 N60 M1006 A0 B10 L100 C0 D10 M60 E0 F10 N60 M1006 A0 B10 L100 C44 D10 M60 E44 F10 N60 M1006 A0 B10 L100 C0 D10 M60 E0 F10 N60 M1006 A0 B10 L100 C39 D10 M60 E39 F10 N60 M1006 A0 B10 L100 C0 D10 M60 E0 F10 N60 M1006 A0 B10 L100 C48 D10 M60 E44 F10 N80 M1006 A0 B10 L100 C0 D10 M60 E0 F10 N80 M1006 A44 B20 L100 C49 D20 M80 E41 F20 N80 M1006 A0 B20 L100 C0 D20 M60 E0 F20 N80 M1006 A0 B20 L100 C37 D20 M30 E37 F20 N60 M1006 W ;===== printer finish sound ========= ;M17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power M400 M18 X Y Z" Make sure to get rid of the " before you insert the G-code! Bye!

I just made a recreation of the leatherman OPNR!#Newmodel #Useful(Edited)

Check our my new monster series!#Newmodel(Edited)

Check out my new monster series!#Newmodel(Edited)

Check out my new Monster series!#Newmodel(Edited)

I just posted a new model! It's one of those mini passthrough cones! Be sure to check it out so I can get a P2S!#Newmodel(Edited)

Does anyone know how to make something very light but still sturdy? I need help designing a filament rack. If you have any advice please comment below. Here's a picture to help.

This is the camera relocation kit by CR Designs.

This is the camera relocation kit by CR Designs. I will add the other video in a part two post.

PEOPLE If you want a bigger purge line go to the pen and paper in the corner by your printer on Bambu studio and click the advanced settings once in advanced settings click on "Machine G-code" and scroll down till you see Nozzle load line and delete it. Then copy my code that just makes the purge line a little bit longer. ;===== nozzle load line =============================== G90 M83 G1 Z0.3 F1200 ; set purge height ; Centered front purge line ~100mm G92 E0 G1 X78 Y5 F2000 ; move to start of line (128-50) G1 X178 Y5 E16 F1000 ; draw 100mm line across front of bed G92 E0 ;===== nozzle load line end =========================== Tell me how it goes! Then you have to save the preset so you can keep the long purge line.(Edited)

Fidget votes.