Batman

Project: barman de verdad.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 141.27x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyTerra Army Blue Transmission Distance: 0.3
PLA BambuLab Basic Pink Transmission Distance: 8
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 9 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Army Blue
At layer #12 (1.04mm) swap to Pink
At layer #15 (1.28mm) swap to Red
At layer #20 (1.68mm) swap to Brown
At layer #23 (1.92mm) swap to Orange
At layer #25 (2.08mm) swap to Blue
At layer #29 (2.4mm) swap to Yellow
At layer #34 (2.8mm) swap to Beige for the rest.