Network Rack - Modular Rack System for Homelab

Modular Rack System for your homelab - Netwôrk Räck

Either 25x25x25cm or 23x25x25 internal volume of one block, stackable in multiple directions

Update 15.2.2025

• Added Full Rack customizer preview. You can now see how your rack will look when assembled.
• Feature is a preview - there are some minor issues and studs are missing.

Update 12.1.2025

• Custom brackets customizer now supports an included platform
• I also included Raspberry PI bracket that supports RPI3, please check your device measurements to confirm the bracket size and hole for your device
• Added more optional print profiles for quick prints
• Improved bridging for connectors, so it prints much better

Update 9.1.2025

• Added Customizable connector

Update 6.1.2025

• Added Cable guide bracket
• Improved the custom bracket generator

Update 8.12.2024

I have added A1 mini profile for 20x20x20cm or 18x20x20cm. Please follow this description:

1. 

   First plate print 4x for shelf 2x for each platform if smaller, 4x if larger. Use copies in a plate in Bambu Handy or right click object and clone in slicer.

2. Second plate print 8x per block, additional blocks need only 4x. Use copies in a plate in Bambu Handy or right click object and clone in slicer.
3. Thrid plate print 1x or 2x depending on the size of your device you want to put on the shelf. You will probably need to print this plate multiple times.
4. Fourth plate print 12x per block, 2-3 per shelf (you can use one as backstop for your device), additional blocks need only 8x. I have already arranged 4x per plate so it will work with app and slicer. You will need to print this plate multiple times.

I have also added a new profile for larger printers so you can follow the same logic.

Update 5.12.2024

Build more modular stuff, like trash bag holder and more - https://makerworld.com/en/collections/3475832

Update 20.11.2024

You can connect Netwôrk Räck to your SKÅDIS panel now: https://makerworld.com/en/models/806609 

High WAF guarantee*

Consists of:

• Rebar 25cm - Main structural component (or use customizer to create your own size)

  

• 4way Connector - Main connecting element in the corners of the block (some holes are semi-sealed for supportless printing). If you need more types of connectors, use customizer.

  

• 2way Connector - Connecting element for shelves.  If you need more types of connectors, use customizer.

  

• Platform 4x25cm - Main shelving unit that your components sit on (or use customizer to create your own)

  

• Basic stud - For horizontal fixing of rebars to connectors

  

• Stud with stop - For vertical fixing of platforms to connectors

  

• Custom brackets - Configure your own bracket through customizer.

  

• Custom Cable brackets - Configure the cable bracket through customizer.

  

Tips:

• If you need longer bracket you can unhide the hidden parameters and customize the length in the customizer like this:

  

• If you are in need of a backstop so your devices are secured in their bracket you can use rebar like this: 

  

• If you are running out of holes in your rebar for shelves, you can now set the include_2way_connector variable in cable bracket or rack bracket to true so you will have combined bracket with two way connector. You can use center_hole_bottom_offset to better account for the shelf when using the included two way connector.

  

This modular system can be used as rack or support for basically anything*. For example LED lights housing, plants, tools and more.

On the pictures you can see my setup: NAS, Modem, VPN router, 2.5G Switch, Zigbee Hub, MiniPC server and WIFI Access point.

* Limited guarantee as I do not actually know your wife.

* Of course it has limited capacity and strength