Search models, users, collections, and posts
Poop
IP Report
Print Profile(5)
Solid Poop - 0.2mm layer, 2 walls, 15% infill
Designer
45 min
1 plate
Hollow Poop - 0.2mm layer, 2 walls, 15% infill
Designer
49 min
1 plate
Solid, Adaptive layer, 5% infill, 10% size and 15% size
32 min
1 plate
0.2mm layer, 2 walls, 3% infill
3.8 h
1 plate
Click to see more
Open in Bambu Studio
Boost
1476
3313
692
139
10.9 k
8.3 k
Released
Description
I was making a poop emoji (as one does…) and this happened on the way.
Printing
There is a hollow and solid poop available depending on your preference. These versions are downsized to 25% by default, so you can enlarge them to the size of the build plate if you want to without losing any detail!
The poops are made to be printed directly on the print bed in their normal orientation with no supports. I used a 0.4 nozzle with a 0.2mm layer height for everything, but using a smaller nozzle/layer height will give much better detail.
The plastic I have used in my print is Extrudr NX-2 matte brown.
Support
If you like our poop please consider joining our club on Printables!
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (692)