Queen bee box
Print Profile(1)
Bill of Materials
Description
This is a box/cage for putting a queen bee and a couple workers in. To complete this project you will need 1/16 inch mesh/net to put over the top, and a marshmallow.
Instructions:
1. Cut a 2 ½ " x 1 ½" piece of the mesh/net.
2. Cut notches about ¼" in from each corner (see picture).
3. Bend edges 90°
4. Stuff mesh in the grooves on the box.
5. (If mesh seems loose) drip Hot glue, Gorilla glue, Starbond, ect into the grooves.
6. Stuff a marshmallow in the hole farthest away from the half circle water holder and put the cap in the other hole (if it is to tight, use some pliers and twist it around in the hole to loosen it up).
7. (when capturing queen) Use a straw and fill the water pot up, put the queen and a couple workers in a ziploc or something similar and cut a corner off, gently work the bees into the box and put the cap in the hole.
Documentation (7)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)