Fidget Pineapple
Print Profile(1)
![[Height: 7.2cm] 0.24mm layer height, 1 walls, 6% infill](https://makerworld.bblmw.com/makerworld/model/US6e64274ee692f0/823987139/instance/4849d8ca9578497c.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
Boost Me (for free)
More fun models are on the way, thank you for your support!
Fidget Toy: Fidget Pineapple
Print in Place, no supports, no AMS required
Mortise and tenon assembly, no glue required
The leaves can be removed for play and reattached as a decoration
Print settings:
Layer height: 0.24mm
Wall width: 0.55mm
Walls: 1
Infill: 10%
Recommended materials:
PLA Basic yellow/green
PLA translucent (yellow) / PETG transparent yellow for a crystal effect
Transforming Fidget Toys Recommendations >>>
Stress Relief Carrot Tower Recommendations >>>
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (2)