Dry Box compact modulo
Print Profile(0)
Description
I wanted to create a compact and modular dry box perfect for every need
It can be used both as a box to keep the filament dry once dried, and directly for printing with the help of the PC4-M10 connector connected to the PTFE tube
The lid is shaped to insert a 3mm silicone gasket, while the drawer is for a 1.5mm gasket, all to maintain the most airtight environment possible (https://it.aliexpress.com/item/1005003195573732.html?spm=a2g0o.order_list.order_list_main.5.a62c3696SzdO4m&gatewayAdapt=glo2ita)
On the front, I inserted a hygrometer (https://it.aliexpress.com/item/1005008841100994.html?spm=a2g0o.order_list.order_list_main.41.21b83696Fev7bf&gatewayAdapt=glo2ita) for an accurate humidity reading, and just below it, you can print a label for the color and material that will be placed inside
Externally on the sides, there are 4 slots per side to accommodate 6x2 mm neodymium magnets, essential for connecting one module to another without wasting space (they must be inserted into the appropriate spaces and protrude by a few tenths of a millimeter, which is necessary to remove the lid without disconnecting the module)
At the base, there is a pull-out drawer with a removable grid where we can insert silica gel
Inside, there is a central pin that engages from the top (due to reduced space, it is not very convenient but can be easily inserted with the aid of long-nose pliers with a little patience)
The dimensions are compact 251x251x80 mm
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)