Hellbat Backlit Hueforge
Print Profile(1)
Description
Project: hellbatbacklit.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 162.69x250mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 3.6mm and the Actual Thickness is 2.72mm
Filaments Used:
#ff6a13 PLA BambuLab Basic Orange Transmission Distance: 7
#ffffff PLA+ eSun White Transmission Distance: 6.5
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#800020 PLA+ Elegoo Burgundy Red Transmission Distance: 5.6
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#e5c8a2 PLA PolyLite Cream Transmission Distance: 2
This print uses 6 unique filaments
Swap Instructions:
Start with Orange
At layer #6 (0.56mm) swap to White
At layer #9 (0.8mm) swap to Red
At layer #17 (1.44mm) swap to Burgundy Red
At layer #25 (2.08mm) swap to Black
At layer #30 (2.48mm) swap to Cream for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)