Vortex Illusion Hueforge
Print Profile(1)
Description
A flowing monochrome vortex design that creates a sense of motion and depth from every angle. The sweeping ribbon-like curves pull inward toward the center, giving this Hueforge a modern abstract appearance that stands out in offices, gaming rooms, studios, or minimalist spaces. The layered grayscale tones enhance the illusion effect while keeping a clean and mature aesthetic.
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #10 (0.88mm) swap to Beige
At layer #21 (1.76mm) swap to Jade White for the rest.
Membership
Turn these designs into something you can share! Commercial Members are welcome to sell physical prints of JC Unboxed creations. Your support helps me keep designing new artwork, useful prints, games, and strange little characters like Monty, Henry & friends. Thanks for opening the box!
License
Comment & Rating (0)