Spool Drying Box
Print Profile(3)
Description
I Uses (compatible with Bambu Lab official spools, my shared 'Golden Experience Spool')
1 To hold desiccant
2 To act as a counterweight for the spool, preventing slippage when filament is low
II Design Details (focusing on simplicity and practicality)
III Printing Details
1 Recommended strength settings: top and bottom layer count set to 0, sparse infill density set to spiral, 30% (default settings)
2 Adaptive layer height (default settings)
3 Print one for testing first. If too tight or too loose, adjust by scaling proportionally. Once the size is right, print multiple at once (Because different materials have different sinkage rates, and machines also have deviations, materials with a high sinkage rate printed on machines that print slightly smaller may result in some looseness)
****20260602 Update*************
1 Lid now has threads
2 Side friction points now have a more elastic design
3 The 'knob' on the lid has increased thickness, while the lid itself has been thinned
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)