Vassili

cover

Screenshot 2026-03-21 144427.png

Screenshot 2026-03-21 143253.png

Screenshot 2026-03-21 143356.png

5.jpg

6.jpg

plate_1.png

7.jpg

<p>The same but only one piece, if you want to print it in another color.</p><p>Optimized for Bambu Lab P2S using a 0.4 mm nozzle. Clean results without supports and stable thin tips.</p><ul><li>Printer: Bambu Lab P2S (0.4 mm nozzle)</li><li>Layer Height: 0.20 mm (High Quality preset)</li><li>Nozzle Diameter: 0.4 mm</li><li>Line Width: 0.42 mm</li><li>Wall Loops: 3</li><li>Top Layers: 5</li><li>Infill: 15% (Gyroid)</li></ul>

One Chopstick, 0.2mm layer, 3 walls, 15% infill

2.jpg

<p>The same but two pieces, if you want to print it in one color.</p><p>Optimized for Bambu Lab P2S using a 0.4 mm nozzle. Clean results without supports and stable thin tips.</p><ul><li>Printer: Bambu Lab P2S (0.4 mm nozzle)</li><li>Layer Height: 0.20 mm (High Quality preset)</li><li>Nozzle Diameter: 0.4 mm</li><li>Line Width: 0.42 mm</li><li>Wall Loops: 3</li><li>Top Layers: 5</li><li>Infill: 15% (Gyroid)</li></ul>

Two Chopsticks, 0.2mm layer, 3 walls, 15% infill

plate_2.png

644aeffa88b68cd9.jpg

<p>Optimized for Bambu Lab P2S using a 0.4 mm nozzle. Clean results without supports and stable thin tips.</p><ul><li>Printer: Bambu Lab P2S (0.4 mm nozzle)</li><li>Layer Height: 0.20 mm (High Quality preset)</li><li>Nozzle Diameter: 0.4 mm</li><li>Line Width: 0.42 mm</li><li>Wall Loops: 3</li><li>Top Layers: 5</li><li>Infill: 15% (Gyroid)</li></ul><p>&nbsp;</p>

0.2mm layer, 3 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Like it? Boost it 👍</boostcontent></boostme><h2>Description</h2><p>Minimalist and functional chopsticks designed specifically for 3D printing. The geometry is optimized for easy printing, balanced handling, and improved grip. The textured tips help with better control when picking up food.</p><p>Suitable as a travel utensil, backup set, or design piece. Can be coated with food-safe epoxy for improved hygiene, but not certified for food contact.</p><h2>Material</h2><ul><li>possible: PLA (limited suitability)</li><li>recommended: PETG</li></ul><h2>Important Usage Notice</h2><p>This model is <strong>not intended for long-term food contact</strong>.</p><p>Due to the nature of FDM 3D printing, layer lines can trap bacteria and make proper cleaning difficult. Mechanical wear may also produce small particles over time.</p><p>For safe food use, certified food-safe materials and proper post-processing would be required.</p><p>→ Use at your own risk<br>→ Best suited for:</p><ul><li>short-term use</li><li>travel / outdoor</li><li>decorative purposes</li></ul><h2>Dimensions</h2><ul><li>Length: approx. 230 mm</li><li>Diameter (handle): 8 mm</li><li>Diameter (tip): 4.5 mm</li></ul><h2>License</h2><p>For personal use only. No commercial use without permission.</p>

Print Profile(3)

Description

Description

Material

Important Usage Notice

Dimensions

License

Comment & Rating (8)

License

Related Models