Moose

This is a simple but highly detailed model of a moose.

My images show the small version scaled down to 5/6  or ca. 83,33% of the file I uploaded.

I decided it might be a bit too small for a decorative model, thats why I oploaded the slightly bigger version as well as the XL version which I didn't print.

The XL version appears when you choose to download the STL files instead of opening them in Bambu Studio.

For the printing settings I used 0.12mm layer hight and 10% lightning infill.

The layer lines are mostly invisble due to the low layer hight and the shiny silk filament.

For the XL version I recommend to use a higher layer hight like 0.20mm to save a lot of time.

I also painted on custom tree supports, which shoud be included in the files, at least that ones that have w support in the file name.

I printed it in White Silk Silver PLA+ from Sunlu on my Bambu P1S.

This is my first upload, so please excuse if there's any flaws.

I'd be happy if you share some photos of your prints.

If you like this model please like and leave a rating.

Edit 07.07.26:

I just opened the file again in bambu studio and the programm offers to repair the model.

I suggest to not use the repair option because it will remove the custom painted supports.

Also some general details to the files uploaded:

There is only one print profile shown, but the other model size (XL) can be found when you choose the option download STL instead of open in Bambu Studio.

The pictures of my print show the print profile (with custom supports) but scaled down to 5/6 or 83,33%, it uses 27g of PLA and needs 3h to print.

If not scaled down it's around 40g and 4h.

For the XL version it's around 120g and 5h.