WF3Dprinting

cover

2023-09-27_9g6d7e4ve74c.jpeg

2023-09-27_1mulju0slqal.jpeg

2023-09-27_lxe714x74fha.jpeg

plate_1.png

Fredwood6000

DSC06823_a5b9cccf-9f67-42f8-8cb1-6608f5be140c.webp

plate_1.webp

50mm high - 0.2mm layer, 2 walls, 10% infill

Miles3D

0.16mm layer, 2 walls, 15% infill

tomz51

1000011290_714a389a-bbad-4263-a7fb-2e47bf344a69.webp

0.8mm nozzle, 0.24mm layer, 1 walls, 0% infill

Ooze Control Creations

Final Egg Pic.JPG

Printing Egg Pics 1.JPG

Printing Egg Pics 2.JPG

These profile settings are what I used for translucent PETG print of this crystal egg after scaling the egg size uniformly to a height of 64mm.<ul><li>0.16mm Layer Height, 0.4mm - 0.5mm layer widths</li><li>2 Wall Loops, 11% Gyroid sparse infill, aligned rectilinear patterns for all others</li><li>Very slow (20mm/s) print speeds for enhanced light transmission through the shell</li><li>270°C Nozzle Temp</li><li>0.99 Filament Flow Ratio</li><li>11 second (slightly increased over 8 second default) min layer time for helping even cooling of each layer (turning the cooling fan fully off resulted in warping in early attempts just due to how quickly the layers are printed, even at these reduced print speeds)</li><li>70°C Textured PEI Plate Temp</li></ul>Make sure the setting under “other” for “infill combination” is turned off (unchecked) as well (it should already be off by default in this uploaded profile). This infill combination setting also seemed to cause me some issues in my first attempts since it seems to cause the slicer to do several layers of wall loops and then several layers of infill, resulting in uneven heating and warping from the high nozzle temp repeatedly passing an area more frequently in a shorter span of time.

Translucent PETG Crystal Egg with Gyroid Infill (64mm Scale)

They model is available in different sizes:100 %: ~ Height 10 cm150 %: ~ Height 15 cm200 %:~ Height 20 cm Of course you can scale it as much as you want, if needed. ;) You can print it with 0% infill, but always use 2 or more perimeters.

Crystal Egg

ASIA

Print Profile(4)

Description

Comment & Rating (121)

License

Related Models