Print Profile(1)
Bill of Materials
- Acrylic rods thickness 10mm, length 100mm x 9: https://a.aliexpress.com/_EHXofC8
- Leds (i use 60 leds/meter to get the correct spacing) x 9: https://a.aliexpress.com/_EJTwaJm
- ESP32-C3 mini x 1: https://a.aliexpress.com/_EJrptYk
Description
This is a small notification system. It's running WLED installed on a ESP32 and powered by a generic USB-C charger.
You need to fixate the led strip with glue or tape in the base.
I recommend printing the model in PETG so it doesn't shrink too much in the holes.
You might need a little bit of sanding in the holes or on the rods if the fit is to snug.
Equipment used
Esp32:
https://a.aliexpress.com/_EJrptYk
Acrylic rods:
9x10mm (length 100mm)
https://a.aliexpress.com/_EHXofC8
Leds:
60 leds/meter (only used 9 of the leds in this project)
https://a.aliexpress.com/_EJTwaJm
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)