SCX30 Shock Riser
Print Profile(1)
Description
This is a riser i made so you can either get higher ride height or lay your shocks down to get more flex and more droop.
Boost Me (for free)
I am very much not a professional, I am just doing this for fun and to learn so a boost would help massively :)
These are VERY small and highly detailed so your printer needs to be dialed in for them to print well, you should probably use a 0.2mm nozzle but i do not own one so you would have to make a profile yourself if you want to use one
(DISCLAIMER: the holes are very tight so you will probably need to force the screws in the first time you screw them in to bore the hole out)
The necessary hardware is eight m1.3 screws at least 5mm long
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)