SpotMicro

Summary

Made by https://www.thingiverse.com/KDY0523/designs

It works on the basis of the Arduino mega, and if you use a different board, you have to redesign the 'plate' file yourself and print the 'non-mega' file instead of the regular file.

The ultra sonic sensor can be used for mapping or obstacle avoidance.

When you attach the servo horn to the 3D printed parts, you must use the HOTGLUE.

THERE IS NO CODE YET, SO YOU HAVE TO WRITE IT YOURSELF.

Assembly video part 1 : https://youtu.be/03RR-mz2hwA

Assembly video part 2 : https://youtu.be/LV5vvmhwtxM

Instagram : https://www.instagram.com/kim.d.yeon/

To make this, you need the following...

Electronics
12 × MG 996 R servo motor
1 × Arduino Mega
2 × HC-SR04 Ultrasonic sensor
1 × HC-06 Bluetooth module
1 × MPU-6050 Gyro sensor
1 × I2C 16x2 LCD Module
1 × Rleil rocker switch RL3-4
7.4v Battery

Screws, Nuts and Bearings
8 × 'M5×15'
40 × 'M4×20'
8 × 'M4×15'
48 × 'M4 nut'
4 × 'M3×20'
28 × 'M3×10'
16 × 'M3 nut'
8 × 'F625zz Flange ball bearing'