Tiny Desk Clock

Summary

The Tiny Desk Clock is a minimalist and space saving desk clock with a clean look and simple design. Perfect for the office, bedroom or living room. The project is fully 3D printable and uses low cost standard components. The clock is designed to print without support material and is easy to assemble.

Features

• Compact and elegant design
• No support structures required
• Fast print time
• Replaceable front cover
• Low material usage
• Great as a gift or decoration

Included Files

• Housing STL
• Front cover STL in three shaft depth variants (6 mm, 7.5 mm, 13 mm)
• Hour hand STL
• Minute hand STL

Recommended Print Settings

• Material: PLA
• Layer height: 0.16-0.2 mm
• Wall thickness: 2-3 lines
• Infill: 15 to 20 percent
• Support: not required

Hardware Required

• Quartz clock movement used in this project: https://www.amazon.de/dp/B0D59XCNVN 

  Any equivalent movement with matching shaft dimensions works.

• One battery, type depends on the chosen movement.
• Small amount of glue if you want to fix the cover permanently.