Head bust stand base

This model is only suitable for M16 interface head sculpts of solid silicone dolls, not for BJD small dolls

I saw a bust stand for this type of head sculpt online, but the price was quite high:

So I wanted to print one myself, but I couldn't find a model anywhere online, so I had to make one myself.

I used Tripo and Hunyuan 3D to generate the basic 3D model and then modified it. The screw version can perfectly fit all M16 interface screws and buckles, and the buckle version is suitable for quick-release buckles.

All the following screws can be used (the buckle version is only suitable for quick-release buckles)

No supports needed, the insert holes are reinforced, less than 250g of filament. PETG material is recommended, it takes about 5-6 hours.

12.24 Update:

Updated screw version, with internal threads, all types of M16 screws can be used

*When using buckles with the screw version, it is not as tight as the buckle version, but it does not affect display use. If you plan to use buckles for a long time, printing the buckle version is better.

12.12 Update:

1. Remodeled, smooth surface

2. Seams modified to be at the back, invisible from the front, and can be covered by long wigs.

3. The uneven part of the bottom surface has been cut off, no need to adjust the model's vertical position, just start printing.

Renderings