battletank

This model is a Battle Tank for the "Mini Action Figure Combattler V" from Action Toys. 

I aimed for a sculpt closer to the one in the show by eliminating the transformation and combination mechanisms. 

As a bonus, I also created a "transport hook" that attaches to the Battle Marine.

Notes on Printing

• The caterpillars (tracks) are recommended to be printed with a 0.2mm nozzle.
• Printing with a 0.4mm nozzle may result in missing parts (defects).
• For the antenna, use a pin vise to drill a 0.5mm hole into the base and insert a brass wire.
• Detailing improvements are welcome.
• Let's share them with everyone.